OUR CHEMISTRY IS EPOXY SYSTEMS
PRODUCT & APPLICATION GUIDE
• Electronic Assembly Products
• Adhesives, Sealants, & Repair Products
• Electric Vehicle (EV) Batteries & EV Components
• Mil-Spec & NSN Products
• Epoxy Putty Sticks
1.800.521.4757 | unitedresin.com | [email protected]
FLEX A
BOND
EPOXY PUTTY
STICKS
HI-STRENGTH
TUFF BOND
EL-CAST
E-CAST
United Resin has been meeting the epoxy resin needs of our
customers for over 50 years and has extensive experience with the
development and manufacturing of epoxy resin systems. United
Resin’s manufacturing processes are designed for consistent
quality and performance. Many products meet stringent military
specications. United Resin has an unwavering commitment to
quality.
United Resin is dedicated to ongoing product development,
continuing research, and collaboration with our customers to
develop special products that address particular requirements.
Our objective is complete customer satisfaction. United Resin’s trained personnel will assist you in seeking
solutions to your project needs and keep you informed of emerging technologies. United Resin is proud to work
with its customers to develop specialized products for their individual product design.
United Resin oers an extensive selection of epoxy adhesives
that satisfy the most demanding requirements of any adhesive
application. We oer systems that cure in as fast as 45 seconds.
FDA compliant systems are available. One-component and
two-component heat cured systems can be matched with
your adhesive needs. Our adhesive and sealing systems are
available in viscosities ranging from as thin as water to as thick
as paste. We have a variety of epoxy repair systems, as well as
our well-regarded epoxy putty sticks. In addition to established
epoxy systems, we also custom formulate for specic needs. All
our materials are non-hazardous, REACH/RoHS compliant,
and contain no solvents. Our products are formulated and
packaged at our manufacturing facility in Royal Oak, MI USA
(made in America!)(made in America!) and sold worldwide.
United Resin has an extensive and established selection of epoxy resin systems for the electronics industry,
several of which are UL approved, meeting potting and encapsulating requirements in a variety of conditions.
We have both lled and non-lled systems in a variety of viscosities. Our products are used for potting and
encapsulating a wide range of electronic assembly components, including coils, batteries (including lithium),
transformers, circuit boards, magnetic components, marine sonar, noise interference lters and surge protectors.
Special systems include Optik-bond, COB and SMT materials used for applications on circuit boards, ber
optics, light emitting diodes and other adhesive applications. All our materials are
non-hazardous, REACH/RoHS compliant, and contain no solvents.
WHO WE ARE
UNITED RESIN’S ADHESIVE EPOXY RESIN SYSTEMS
UNITED RESIN’S ELECTRONIC ASSEMBLY EPOXY RESIN SYSTEMS
United Resin’s highly regarded epoxy putty sticks are the result of over 30 years of product development
and manufacturing experience. Our Fastweld Epoxy Putty Sticks and Fastwood Epoxy Putty Sticks
are made with our best-in-class proprietary process. Our Epoxy Putty Sticks come in two
standard lengths, 3.5-inch, and 7-inch. Custom lengths and colors are available.
UNITED RESIN’S EPOXY PUTTY STICKS
is product is a cylindrical
epoxy dough kit that is
activated by hand mixing the
material. We have sticks that
cure in 5 and 20 minutes and
harden like steel in 30-40 minutes. It
forms a tenacious bond in minutes, even
underwater, and may be drilled, led, tapped,
or sanded aer 1 hour of cure time. Fastweld
Epoxy Putty Sticks come in gray, black, and white as
standard colors.
United Resin has several well-established epoxy
systems for potting and encapsulating batteries,
battery components, and electronic casting. Epoxy
resin will keep your batteries secure from damage
caused by shock, moisture vibration, chemicals, and
many other elements. We have materials ready for
most applications and can develop custom systems to
meet all your requirements. Contact one of our epoxy
experts to discuss your requirements and we will
work with you to tailor a product to t your
needs. Our goal is to nd the right material for
your application.
United Resin provides full technical support for
government contractors, OEM and tier suppliers. Our
team has the tools to assist you in identifying United
Resin part numbers that comply with military
federal specications and standards. United Resin
specializes in providing defense contractors, OEM and
tier suppliers with adhesives, sealants, repair materials
and other epoxy resin systems that are certied to
a number of military and federal specications and
standards. United Resin manufactures a wide range of
NSN products.
For a list of our NSN products visit unitedresin.com
FASTWELD EPOXY
PUTTY STICKS
UNITED RESIN’S EPOXY RESIN SYSTEMS FOR
BATTERY POTTING, ENCAPSULATION, ELECTRIC
VEHICLE (EV) & EV COMPONENTS
MIL-SPEC AND NSN PRODUCTS
is product is a cylindrical epoxy dough kit
that is activated by hand mixing the material.
It cures in 5 minutes. It is an epoxy compound
for permanent wood repairs, such as lling nail
holes, replacing and reshaping wood parts and
for general restoration. Its unique properties
include its ability to be molded to any shape and
rapid cure. It forms a tenacious bond in minutes.
Fastwood Epoxy Putty may be drilled, led,
tapped, or sanded aer 1 hour of cure time.
FASTWOOD EPOXY PUTTY STICKS
1.800.521.4757 | unitedresin.com | info@unitedresin.com
1.800.521.4757 | unitedresin.com | info@unitedresin.com
RESINS ARE LISTED WITH MOST POPULAR HARDENER
OTHER HARDENERS WHICH ALLOW FOR INDIVIDUAL PRODUCTS DESIGN***
WE HAVE MANY OTHER HARDENERS, ALLOWING FOR INDIVIDUAL PRODUCT DESIGN
PRODUCT AND DESCRIPTION HARDENERS COLOR
HARDNESS SHORE “D”
MIXING RATIO
(Parts by Weight)
MAXIMUM USE
TEMPERATURE
ºF
MIXED VISCOSITY
CPS @ 72ºF
DIELECTRIC
STRENGTH
as per ASTM D149
DIELECTRIC
CONSTANT
as per ASTM D150
CTE
In/In/ºF
per ASTM D696
THERMAL
CONDUCTIVITY-BTU
as per ASTM C177
POT LIFE
MINUTES
(100 gram Mass)
@ 72ºF
@ 72ºF RESIN HARDENER
EL-CAST is a filled, medium viscosity, general purpose potting and encapsulating resin. Excellent
bonding properties, good air release and high gloss finish. Underwriter Laboratory (UL) approved 94 HB.
Ideal for transformers, circuit boards, magnetic components, noise filters, and other applications.
111
117
118
150
215
641
4123
TP-41F
TS-100
Black/White
85
70 “A”
85
80
85
80
85
80
85
100
100
100
100
100
100
100
100
100
85
50
10
25
12
13
13
13
8
250
250
350
250
250
250
250
300
300
24,000
4,160
7,600
8,800
11,500
16,000
8,000
17,400
2,800
490
440
498
498
409
409
409
409
498
3.71
4.15
4.21
4.39
4.21
4.39
4.32
4.32
4.14
1.16 x 10-5
3.21 x 10-5
3.89 x 10-6
5.62 x 10-6
1.32 x 10-5
3.87 x 10-6
9.75 x 10-6
5.76 x 10-6
5.74 x 10-6
6.40
5.85
6.10
5.50
6.91
6.50
6.00
6.95
6.95
15
120
120
300
270
60
70
20
120
EL-CAST 760 is a filled, medium viscosity, high temperature potting and encapsulating resin.
Excellent impact resistance, thermal shock resistance, thermal conductivity and high deflection
temperature. Ideal for control units, transformers, noise filters, and other applications.
118
150
215
641
Black
80
80
90
75
100
100
100
100
12
50
13
15
400
400
400
400
12,000
10,400
8,500
16,000
432
430
430
430
5.17
5.10
5.10
5.10
1.92 x 10-5
1.13 x 10-6
2.69 x 10-6
1.16 x 10-6
11.56
11.50
11.70
12.25
45
150
120
40
EL-CAST VFR is a filled, low viscosity, high temperature potting and encapsulating resin.
Underwriter Laboratory (UL) approved 94 V-O. Resin has excellent bonding properties, high gloss finish
with minimal shrinkage and with 117 hardener is a soft 94 V-O material. Ideal for transformers, alarm
systems, filters, magnetic components and surge protectors.
117
118
641
4123
TS-100
Black
75 “A”
85
85
80
85
100
100
100
100
100
30
10
12
12
6
200
400
250
250
300
7,000
6,000
8,000
5,000
6,000
496
499
496
496
408
4.22
4.28
4.28
4.22
4.48
4.41 x 10-5
5.35 x 10-6
5.33 x 10-6
1.34 x 10-5
7.90 x 10-6
6.25
6.65
7.00
6.70
6.65
180
120
80
80
240
EL-CAST SS is a highly filled, general purpose potting resin, with high thermal conductivity and
high strength. Ideal for all applications requiring a tough protective system with high mechanical and
physical properties.
118
203
210
Black
90
90
90
100
100
100
8
14
15
400
500
400
58,000
10,000
32,000
405
405
405
5.43
5.43
6.20
4.04 x 10-6
3.78 x 10-6
1.91 x 10-6
9.84
9.10
9.70
90
210
210
EL-CAST FR is a filled two component, lower cost epoxy system with excellent bonding qualities
to metals, plastics, and ceramics. This system is UL approved for 94V-O. Good air release and low
viscosity allows the cured part to have a high gloss finish.
440 Black/White 80 100 94 250 26,000 409 4.32 1.26x10-5 6.00 60
EL-CAST 1-F-5 TAB , TAB-SR, TAB H are filled, medium viscosity resins that
can be used as a one or two component system with excellent thermal conductivity and high
temperature resistance. Exhibits good chemical resistance and excellent adhesion at high temperature
with a room temperature or a heat cure. Ideal for transformers, filters, coils and all applications where
heat cure is possible.
TAB-H - NONE
TAB - NONE
TAB-SR - TS-100
TAB-SR - 118
Black
95
95
90
90
N/A
N/A
100
100
N/A
N/A
7
10
500
500
250
500
275,000
50,000
5,000
8,000
550
550
550
550
4.88
4.88
4.88
4.88
2.35 x 10-5
1.62 x 10-5
4.90 x 10-5
2.35 x 10-5
10.00
10.00
10.00
10.00
N/A
N/A
45
70
EL-CAST 1-F-5 TAB VO is a filled, high viscosity, high temperature one component
system. Underwriter Laboratory (UL) approved 94 V-O. Exhibits low odor, good air release, high gloss
finish, and good thermal conductivity. Also used as an encapsulant for “chip-on-board” applications.
NONE Black 95 N/A 500 100,000 463 4.71 1.58 x 10-5 10.00 N/A
UNI-LAM 1069 is a filled, medium viscosity, general purpose potting compound. Excellent
bonding to metals, plastic and ceramics with high gloss finish. Ideal for all potting applications.
4123 Black/White 80 100 12 300 5,800 398 4.14 8.37 x 10-6 6.10 72
E-CAST FLAME BLOC is an unfilled epoxy system approved UL 94 V-O. This system
offers excellent air release and gloss. It has a rigid cure with excellent adhesion and chemical resistance.
125 Clear 85 100 20 200 1600 487 5.10 3.34 x 10-6 1.65 40
E-CAST F-28 is an unfilled, medium viscosity, high strength resin with good release, excellent
adhesion, clarity and room temperature rigid cure. Ideal for applications where internal viewing is
required.
110
117
118
130
150
215
282
641
4123
TP-41F
Black/Clear
80
70 “A”
85
80
85
85
75
85
80
85
100
100
100
100
100
100
100
100
100
100
84
100
20
80
50
33
80
25
25
25
250
200
300
200
200
250
250
250
250
300
12,000
7,000
7,000
4,000
9,100
4,000
14,000
8,400
3,600
7,600
450
460
522
450
490
490
630
487
522
498
5.41
5.12
4.47
5.41
3.75
3.75
5.51
4.10
5.47
3.90
3.73 x 10-6
7.55 x 10-6
1.35 x 10-5
9.64 x 10-6
2.40 x 10-6
3.83 x 10-6
3.35 x 10-5
1.33 x 10-5
3.40 x 10-6
1.14 x 10-5
1.70
1.70
1.70
1.70
1.70
1.70
1.37
1.70
1.70
1.70
20
50
40
40
180
120
150
30
45
20
E-CAST F-82 is an unfilled, low viscosity resin with high strength adhesion, good air release.
Ideal for the most intricate applications, circuit boards, and other applications.
117
150
215
282
641
4123
TP-41F
Black/Clear
50 “A”
75
85
70
60
75
80
100
100
100
100
100
100
100
100
50
33
80
25
25
25
250
200
200
200
200
200
250
1,200
1,500
600
7,000
1,700
450
1,400
540
490
490
510
487
487
490
4.15
4.75
3.75
3.89
4.10
5.10
4.15
1.53 x 10-5
2.81 x 10-5
4.48 x 10-6
3.92 x 10-5
1.56 x 10-5
6.30 x 10-5
1.33 x 10-5
1.65
1.65
1.65
1.78
1.65
1.65
1.65
60
330
180
240
30
40
15
E-CAST W.G. is an unfilled, low viscosity, clear potting compound. Excellent adhesion and low
viscosity allows for the most intricate applications. Ideal for circuit boards, power supplies, and other
applications.
215
601
641
Clear
60
85
80
100
100
100
33
33
25
200
250
250
1,320
1,445
1,680
490
487
487
3.75
3.80
3.90
5.10 x 10-6
2.56 x 10-5
3.45 x 10-6
1.75
1.65
1.60
150
90
45
CONDUCTIVE EPOXY is a high strength, heat resistant, silver filled system, which can be
cured at ambient or elevated temperatures.
601
TP-41F
Silver
Silver
85
85
100
100
7.7
8
300
300
Paste Paste Paste
—
—
3.90
3.90
1.15 x 10-5
1.16 x 10-5
13.0
13.0
60
25
E-CAST CCA is an unfilled, low viscosity resin with superior penetrating properties and high
gloss finish.
125
300
4123
Clear/Black
75
80
85
100
100
100
44
20
29
250
375
250
620
540
330
558
450
478
4.71
5.41
3.61
1.82 x 10-5
8.27 x 10-6
5.05 x 10-6
1.15
1.70
1.15
14
40
12
VIBRAFLEX is a vibration dampening, flexible epoxy system featuring low exotherm, good
thermal shock, low shrinkage, and can be easily cut for repair of components.
110
515
621
Black/Clear
70
50 “A”
85
100
100
100
88
100
45
200
200
250
34,000
19,800
28,000
400
400
400
4.15
4.15
4.15
1.15 x 10-5
1.52 x 10-5
1.65
1.65
1.65
18
90
23
ELECTRONIC EPOXY SYSTEMS
ADHESIVE & REPAIR EPOXY SYSTEMS
1.800.521.4757 | unitedresin.com | info@unitedresin.com
RESINS ARE LISTED WITH MOST POPULAR HARDENER WE HAVE MANY OTHER HARDENERS, ALLOWING FOR INDIVIDUAL PRODUCT DESIGN
PRODUCT COLOR MAXIMUM USE TEMP. HARDNESS SHORE “D” TENSILE STRENGTH MIXED VISCOSITY
POT LIFE
100 GRAMS @ 72°F
DESCRIPTION
ALUMINUM FILLED REPAIR COMPOUND /
HARDENER 205
GRAY 250°F 90 9,230 PSI 12,000 65 MINS. Exhibits good impact resistance and improved wear resistance. Meets MIL Spec. R-22628.
AUTOBOND / HARDENER 506 GRAY 250°F 60 7,500 PSI PASTE 5 MINS.
This system has superior adhesive properties on all metals, rubber and hard plastics (non-polyethylene) and
is sandable in 10 to 15 minutes. Used in automotive repairs and all plastic parts repair.
AUTOBOND SMC / HARDENER 109 GRAY 250°F 85 5,000 PSI PASTE 26 MINS. A non-sag adhesive with superior bonding to all substrates including SMC and stainless steel.
E-CAST CCA / HARDENER 110 CLEAR/BLACK 250°F 85 5,000 PSI 2,800 CPS 15 MINS.
This system has a rigid cure with excellent adhesion and chemical resistance. It exhibits excellent thermal
shock and impact resistance.
E-CAST F-28 / HARDENER 380
HARDENER 385
CLEAR/BLACK 250°F 80
2,500 PSI 14,000 CPS 4 MINS.
A general purpose, quick setting epoxy for adhesive and patching applications.
4,500 PSI 13,750 CPS 45 SECONDS
E-CAST F-28 / HARDENER 282 CLEAR/BLACK 250°F 75 3,000 PSI 9,500 2.5 HRS. A high impact, vibration resistant, flexible adhesive for metals, plastics, wood and ceramics.
E-CAST F-28 / HARDENER F-14 CLEAR/BLACK 250°F 85 8,000 PSI 11,000 CPS 140 MINS.
Good adhesion to metals, plastics and ceramics. Meets requirements of FDA under 21 CFR 175.300 and MIL
Spec. A-81236.
E-CAST SUR-GRIP / HARDENER 282 CLEAR/BLAVK 250°F 70 8,000 PSI 14,000 CPS 4.5 Hours This is a rubber based epoxy system that exhibits good thermal shock and excellent impact resistance.
E-CAST SUR-GRIP / HARDENER 620 CLEAR/BLACK 250°F 80 8,000 PSI 14,000 CPS 105 MINS.. A high impact, vibration resistant, flexible adhesive for metals, plastics, wood and ceramics.
EPOXY BOND D.G. / HARDENER 141 CLEAR/BLACK 250°F 85 9,500 PSI 18,800 CPS 30 MINS.
This is an unfilled epoxy system with a room temperature cure with excellent adhesion to metals, plastics and
ceramics.
EPOXY ALUMINUM REPAIR PUTTY /
HARDENER 987
GRAY 300°F 90 5,000 PSI PASTE 55 MINS.
A durable compound for repair to aluminum castings and tooling applications. When cured, this system can
be drilled or tapped using conventional metalworking tools.
EPOXY ALUMINUM REPAIR LIQUID /
HARDENER 988
GRAY 300°F 90 5,000 PSI PASTE 55 MINS.
An aluminum-filled pourable epoxy system used for making molds, patterns and holding fixtures. This system
permits reproduction of delicate or intricate parts for accurate reproduction of details.
EPOXY METAL REPAIR COMPOUND /
HARDENER 619
BLACK 250°F 75 5,500 PSI PASTE 150 MINS.
This system is a non-sag compound, with superior compressive and adhesive strength. It adheres to most
metals and various substrates. Meets MIL Spec. C-24176 Type I and Type II.
EPOXY STEEL REPAIR PUTTY / HARDENER
987
GRAY 300°F 90 5,400 PSI PASTE 45 MINS.
A durable compound that can be drilled, tapped, machined or painted when cured. Bonds to steel, aluminum,
brass, wood, glass, ceramic and iron. Ideal for patching, repairing and rebuilding steel equipment. Meets AA-
56015A.
EPOXY STEEL REPAIR LIQUID / HARDENER
988
GRAY 250°F 90 6,100 PSI 9,600 CPS 45 MINS.
A steel-filled pourable epoxy system for maintenance, repair and tooling applications. This system can be
cast over models for accurate detail reproduction. When cured, this system can be drilled, tapped, machined
or painted.
FASTWELD PUTTY STICK / Steel,
Aluminum, Fiberglass, Plastic
VARIOUS 250°F 85 7,000 PSI PUTTY 5 MINS.
Used to mold, fill and bond practically anything. May be drilled, filled and sanded after one hour. Adheres to
aluminum, iron, steel, wood, glass, masonry, ceramics and many plastics.
Meets MIL Spec. S-8802 Class B
FASTWOOD PUTTY STICK VARIOUS 250°F 85 6,000 PSI PUTTY 7-10 MINS
An epoxy compound for permanent wood repairs such as filling nail holes, replacing and reshaping wood
parts and for general restoration. Its unique properties include its ability to be molded to any shape and rapid
cure.
METALBOND-187B GRAY 250°F 80 5,000 PSI PASTE 2.5 HRS.
Exhibits excellent adhesive properties on metals and is resistant to most chemicals and moisture with good
thermal shock resistance. Meets MIL Spec. MMM-A-187B.
METAL FILLED / HARDENER 230 GRAY 370°F 85 4,000 PSI 270,000 CPS 2.5 HRS. An adhesive and sealing compound for all metals. Meets MIL Spec. MMM-A-1754.
QUICKBOND / QUICKBOND L.V. OPAQUE 250°F 85 2,500 PSI 105,000 3-5 MINS.
Excellent all purpose repair epoxy that can be handled in 5 minutes and cures to a full bond strength in one
hour. Excellent adhesion to wood, ceramics, metals, fiberglass, glass and china .
SUPERBOND GEL / SUPERBOND LIQUID CLEAR 200°F 85/80 3,600 PSI GEL/8,000 CPS 3-5 MINS.
This is a quick set adhesive with superior adhesive properties on all metals, rubber and hard
plastics (non-polyethylene) and is sandable in 10 to 15 minutes.
UNI-BOND ECA / HARDENER 110 OPAQUE/BLACK 250°F 85 4,500 PSI GEL 20 MINS.
Adhesive used for applications such as wire staking, bonding components, strain gauges, fiber optics and
ferrite cores.
UNI-BOND ECA / HARDENER 621 OPAQUE/BLACK 300°F 85 3,000 PSI 61,500 CPS 15 MINS.
Adhesive used for applications such as wire staking, bonding components, strain gauges, fiber optics and
ferrite cores.
UNI-BOND W.G. / HARDENER F-14 CLEAR 250°F 80 5,000 PSI 6,000 CPS 3-4 HRS.
Adhesive used for glass reinforced coating on metals for protection against the corrosive effects of salt water.
Meets MIL Spec. R-23461A.
UNI-BOND W.G. / HARDENER TP-41F CLEAR 250°F 85 3,000 PSI 1,810 CPS 12 MINS. Widely used in the automotive and aerospace industries as impreg glue.
HI-STRENGTH TUFF BOND/ HARDENER 250 OPAQUE 250°F 80 10,500 PSI 91,000 CPS 20 MINS.
A toughened medium viscosity adhesive that forms a tough bond line with high peel resistance and high shear
strength.
FLEX-A-BOND / HARDENER 740 Regular CLEAR/BLACK 250°F 65 1,200 PSI 13,000 CPS 3-4 HRS.
An unfilled epoxy adhesive used for those hard to bond substrates such as PTFE, nylon, stainless steel and
other difficult substrates.
FLEX-A-BOND / HARDENER 740 Sprayable CLEAR/BLACK 250°F 65 1,200 PSI 5,840 CPS 3-4 HRS.
A unfilled epoxy adhesive used for those hard to bond substrates such as PTFE, nylon, stainless steel and
other difficult substrates.
FLEX-A-BOND / HARDENER 741 Paste GRAY 180°F 65 1,300 PSI PASTE 2-3 HRS. A non-sag paste version of above.
RAPID REPAIR PUTTY STICK GRAY
250°F CONTINUOUS
400°F INTERMITENT
50D 7,000 PSI PUTTY 5 MINS
An epoxy compound for permanent wood repairs such as filling nail holes, replacing and reshaping wood
parts and for general restoration. Its unique properties include its ability to be molded to any shape and rapid
cure. Meets MIL Spec. S-8802 Class B.
OTHER HARDENERS WHICH ALLOW FOR INDIVIDUAL PRODUCTS DESIGN***
OPTIK-BOND ADHESIVES are ideal for potting and sealing optical connectors, fibers, lenses, and all other optical components.
MIXED VISCOSITY
cps @ 72°F
TENSILE STRENGTH PSI LAP SHEAR PSI
ELONGATION @
BREAK
%
CTE PPM/°C GLASS TRANSITION (Tg) °F
POT LIFE MINUTES
(100 GRAM MASS) @ 72°F
LOW VISCOSITY — OPTIK-BOND CCA/125
620
1,180
1,970 100 55
140
14
IMPACT RESISTANT — OPTIK-BOND CCA/205 384 6,900 3,080 14 52.4 180 12
EXTENDED WORK LIFE — OPTIK-BOND CCA/929 220 5,500 5,600 7 51.9 140 50
GENERAL PURPOSE — OPTIK-BOND ECA/929 Thixotropic 8,160 8,200 8.16 52.3 200 240
COB SYSTEMS are a series of single component, high performance, flow control and encapsulating applications for the semiconductor industry.
VISCOSITY
cps @ 72°F
GLASS TRANSITION
(TG) °C
CTE PPM/ °C HALOGEN FREE
CURE SCHEDULE
HOURS
@ 125 °C
SURFACE RESISTIVITY PER
ASTM
D257
DISSIPATION
FACTOR PER ASTM
D150
DIELECTRIC
CONSTANT
PER ASTM D149
(1 kHz)
EPOXY DAM CONTROL
PASTE 180 39.0 YES 6 2.09 x 10
14
0.0092
4.94
EPOXY FILL SYSTEM 80,000 175 39.5 YES 6 2.89 x 10
14 0.0081 5.02
LOW PROFILE GLOP TOP 105,000 175 39.5 YES 2 2.39 x 10
14 0.0087 4.97
HIGH PROFILE GLOP TOP 455,000 177 39.1 YES 2 2.39 x 10
14 0.0087 4.97
LOW CHLORINE ENCAPSULANT 63,000 165 28.0 YES 3 2.39 x 10
14 0.0087 4.97
SMT SYSTEMS
COLOR
VISCOSITY
cps @ 72°F
MAX USE TEMP HALOGEN FREE
CURE @ 300 F
MIN
GLASS TRANSITION
°C
CTE
In/In/°F PER ASTM D696
TENSILE
STRENGTH PSI
CIRCUIT BOND — RV
RED/BLACK
1,000,000
500 YES 7-10
121
1.57 x 10
-6 5,000
CIRCUIT BOND — MV RED/BLACK 120,000 500 NO 7-10 121 1.67 x 10
-6 5,000
CIRCUIT BOND — LV RED/BLACK 50,000 500 NO 7-10 121 6.59 x 10
-6 5,000
CIRCUIT BOND — SLV RED/BLACK 11,000 500 NO 7-10 121 2.57 x 10
-5 5,000
NOTES
SPECIALTY EPOXY SYSTEMS
1.800.521.4757 | unitedresin.com | info@unitedresin.com
RESINS ARE LISTED WITH MOST POPULAR HARDENER WE HAVE MANY OTHER HARDENERS, ALLOWING FOR INDIVIDUAL PRODUCT DESIGN
United Resin’s adhesive epoxy systems work well
in dispensing equipment
Lightweight Epoxy Systems Epoxy systems for potting and encapsulation
Epoxy systems for many battery applications
PRODUCT AND DESCRIPTION
POT LIFE
MINUTES
(100 gram Mass)
MAXIMUM USE
TEMPERATURE
°F
HARDNESS
SHORE “D” @ 72°F
MIXING RATIO
(Parts by Weight)
RESIN/HARDENER
MIXED VISCOSITY
cps @ 72°F
COMPRESSIVE
STRENGTH PSI
FLEXURAL
STRENGTH PSI
TENSILE
STRENGTH PSI
CTE
In/In/°F x 10-5
SURFACE COAT SYSTEMS:
20 250 90 100/14
170,000/
15,000 (thin)
16,800 7,000 5,100 4.8
Uni-Gel S.C. 90 w/hardener TP-41F is a white, room temperature cure, epoxy surface coat. It has good bonding properties,
holds well on vertical surfaces and its viscosity allows it to be easily measured through a dispenser. It is highly recommended for
plastic faced plasters and renders a hard surface. This system is also available in a thin version suitable for spray applications.
High Heat Surface Coat w/hardener 118 and hardener 203 are aluminum filled high heat surface coats used as a base on
high heat tools. Designed to produce void free duplications that are dimensionally accurate. The system demonstrates high surface
strength with superior physical properties. Post curing is required to obtain maximum deflection temperatures.
118 - 70
203 - 240
400
400
85
85
100/11
100/13
25,350
25,350
26,500
26,500
7,950
7,950
4,000
4,000
2.3
2.3
LAMINATING SYSTEMS:
35 250 85 100/20 3,000 40,000 29,443 5,500 1.48
Uni-Lam RTL w/hardener PT-60F is a room temperature curing system, with excellent dimensional stability. It has excellent
wet-out qualities when laminating with glass cloth. The material will not sag on vertical surfaces, nor will it shrink. It is approved for
automotive and aerospace applications.
Uni-Heat w/hardener 118 and hardener 203 are high heat laminating systems especially designed for most high temperature
tooling applications. They also work well where vacuum bag construction is used. They cure at room temperature or can be heat
cycle cured. Post curing is required to obtain maximum deflection temperatures. Uni-Heat w/118 meets MIL Spec. S-83430A.
118- 60
203- 180
350
500
90
90
100/20
100/30
1,900
1,850
40,500
40,500
35,600
35,600
8,000
8,500
0.90
0.92
Uni-Bond W.G. w/hardener 601 is a clear, unfilled, multi-purpose lamination material which exhibits excellent moisture and
chemical resistance. It has numerous adhesive applications, including extensive use in the automotive and aerospace industries as
“impreg glue”.
90 250 85 100/33 1,445 20,000 39,900 4,000 2.90
Uni-Bond 1070 w/hardener 601 is an unfilled room temperature laminating system with low exotherm. It is a dimensionally
stable material with high surface strength and a long pot life. This material contains a tracer dye to insure proper mixing.
90 250 85 100/33 1,445 26,500 39,000 6,300 2.10
CASTING SYSTEMS:
120 250 85 100/7 14,350 29,000 8,500 7,200 2.10
Uni-Cast M.C. w/hardener 210 is an iron-filled abrasion resistant compound used where heavy section casting is required. Its
slow cure provides negligible shrinkage, excellent heat dissipation and a low coefficient of expansion.
Uni-Cast A.S.C.T. w/hardener 601 is a gray, aluminum filled surface casting resin that is virtually indestructible. It produces a
hard, durable casting, and allows for extremely accurate reproductions. It is a safe, low odor system especially designed to cast in
sections of 1/64” to 1/2” in thickness.
80 250 80 100/18 16,000 17,200 10,200 8,100 2.90
ADDITIONAL SYSTEMS:
N/A 400 85 100/80 2,500 25,000 14,500 6,000 2.23
E-Cast F-28 w/hardener 213 provides high heat deflection temperatures coupled with excellent mechanical, chemical, and
electrical properties. Formulated for low thermal expansion and excellent impact resistance. Meets Mil Spec. C-47257C. Ideal for
filament winding and requires heat to cure.
Tooling Foam is a light weight, non-expanding/non-shrinking epoxy compound. It is color coded to insure proper mixing. Due to its
consistency, it is easily packed onto the surface to be duplicated surface. When used with fiberglass cloth in a sandwich panel
construction, it exhibits excellent dimensional stability and strength. Approved for use in the aerospace, automotive, marine and
recreational vehicle industries.
50 250 55 100/33 Syntatic Dough 28,000 32,000 500 2.44
Epoxy Molding Compound is a light weight, durable molding material that is color coded to insure proper mixing. Its low
exotherm during cure offers high dimensional stability, making it ideal for structural applications.
180-240 250 72 100/100 Paste 5,100 4,550 8,850 2.34
SPECIALTY EPOXY SYSTEMS
1.800.521.4757 | unitedresin.com | info@unitedresin.com
RESINS ARE LISTED WITH MOST POPULAR HARDENER WE HAVE MANY OTHER HARDENERS, ALLOWING FOR INDIVIDUAL PRODUCT DESIGN
SALES AND DISTRIBUTIONSALES AND DISTRIBUTION
2942 N GREENFIELD RD SUITE 149, MESA, AZ 85215
1.480.830.3200
CORPORATE HEADQUARTERS AND MANUFACTURINGCORPORATE HEADQUARTERS AND MANUFACTURING
4359 NORMANDY CT, ROYAL OAK, MI 48073
1.248.549.8200
MI
AZ
unitedresin.com | [email protected]
© 2022 United Resin Inc. ALL RIGHTS RESERVED
IMPORTANT NOTICES
THIS INFORMATION IS PRESENTED IN GOOD FAITH TO ASSIST THE USER IN DETERMINING WHETHER OUR PRODUCTS
ARE SUITABLE FOR THEIR APPLICATION. NO WARRANTY OR REPRESENTATION IS INTENDED OR MADE, NOR IS
PROTECTION FROM ANY LAW OR PATENT TO BE INFERRED, AND ALL PATENT RIGHTS ARE RESERVED.
All precautionary labels and notices should be fully read and understood by all personnel before using the products listed.
For additional safety and health information, contact United Resin, Inc. Purchaser has the responsibility to determine
any applicability of and compliance with federal, state, and local laws and/or regulations regarding use. The information
contained herein is correct to the best of our knowledge. The recommendations or suggestions contained in this brochure
are made without guarantee or representation as to results. All recommendations or suggestions should be evaluated prior
to use. Our responsibility for claims arising from breach of warranty, negligence, or otherwise is limited to the purchase
price of the material. There are no implied or express warranties for these listed or other products. Refer to all labels.
For Terms and Conditions of Sale, see unitedresin.com
OUR CHEMISTRY IS EPOXY SYSTEMS
